Skip to Content

We use AI-generated or AI-enhanced product photos.

Floor lamp in an old building, in the foreground a black MOUNTME® DimCase in the supply cable

MOUNTME® for table and floor lamps

The cord switch becomes a Casambi® dimmer.

Replace the switch or dimmer in the supply cable of your lamp with a MOUNTME® DimCase. From then on you dim by app, push button or schedule, without gateway and without hub.

The four models

As simple as that

  1. Switch outThe old cord switch or cord dimmer in the supply cable of the table or floor lamp is removed.
  2. MOUNTME® inIn its place goes the DimCase with Casambi® dimmer module. Supply cable and lamp cable are connected inside the DimCase and held by the strain relief.
  3. Open the appThe lamp appears in the Casambi® app. Dimming, scenes, schedules and push buttons run over Bluetooth, without gateway, without hub.

Please have the installation carried out by a skilled electrician. This keeps the 230 V connection safe and your lamp working reliably.

Safety

Strain relief worthy of the name

A Casambi® dimmer module has no strain relief of its own. If it lies loose in the supply cable, even a light pull on the cable can tear the wires out of the terminals. Then 230 V mains voltage is exposed, and that is life-threatening for people.

That is why MOUNTME® One, Two, Three and Four have a toothed strain relief with triple screw fixing at every cable entry. If someone pulls the cable or the lamp is moved, the DimCase takes the pull, not the terminal.

MOUNTME® Four opened: two modules, at both ends the strain relief with three screws each
MOUNTME® Four opened: at both ends the strain relief with three screws each.

The four models

All with Casambi® trailing-edge dimmer for 230 V, up to 100 W per channel. Hover over a picture to see the dimensions. You choose the colour black or white on the product page.

Please have the installation carried out by a skilled electrician. This keeps the 230 V connection safe and your lamp working reliably.

White MOUNTME® Two Mag holding on a metal shelf

MAG series

Holds on metal furniture

Each of the four models is also available as Mag. Strong magnets are built into the base plate. This lets the DimCase hold on metal surfaces, such as shelves, sideboards and frames made of steel, and disappear at the side or under the top instead of lying on the floor.

On wood, glass or plastic you fix it, for example, with double-sided adhesive tape.

Also on, on top of and under furniture

Thanks to the secure strain relief, the DimCases can also be fitted on, on top of or under furniture, for example for a reading lamp at the bed or a lamp on the sideboard. They are, however, intended above all for the supply cable of table and floor lamps.

Please have the installation carried out by a skilled electrician. This keeps the 230 V connection safe and your lamp working reliably.

All MOUNTME® at a glance

Floor lamp in warm evening light, MOUNTME® One on the parquet