Light with a wave of the hand. The gesture dimmer dims Tunable White LED strips (warm and cool light separately) without touch: hold your hand in front of the sensor and the light switches on, off, or gets brighter and darker. The sensor responds at about 5 cm and calibrates itself.
At only 3.5 mm wide, it is so slim that it fits next to the LED strip in the aluminium profile. It is wired directly in the profile and disappears behind the cover.
Two channels control the warm and cool light of the Tunable White strip separately, so you set the light colour as well as the brightness.
Application
For constant-voltage LED strips and LED modules from 8 to 27 V DC, for example 12 V and 24 V strips. Power comes from a suitable constant-voltage source, which is not included. The dimmer works on its own, without an app and without a radio network.
Technical data
| Operation | Gesture, touch-free |
| Channels | 2 (Tunable White) |
| Output current | max. 3 A per channel |
| Power | max. 81 W per channel at 27 V (at 12 V max. 36 W, at 24 V max. 72 W) |
| Input voltage | 8–27 V DC, constant voltage |
| Sensor range | approx. 5 cm |
| Calibration | automatic |
| No-load power | 0.4 W |
| Dimensions | 100 × 3.5 × 3 mm (L × W × H) |
| Connection | Solder pads |
| Housing | none, for built-in use |
| Operating temperature | 0–40 °C |
| Protection rating | IP20, for dry indoor spaces only |
Scope of delivery
1 gesture dimmer as circuit board, without housing, cable or power supply.
Note: Please have the installation carried out by a qualified electrician. This keeps the connection safe and your lighting working reliably.