Transformer, dimmer and Casambi® in one housing. MOUNTME® Onethousandone Casambi® powers a 24 V LED luminaire of up to 60 W and makes it dimmable at the same time: with the push-button on the housing or via Casambi®.
Developed at a customer's request for the PYLITE luminaire by Dan Treacy for RAKUMBA®. It suits all luminaires with 24 V constant voltage and a power consumption of no more than 60 W.
The transformer is cooled by convection: air flows through the housing. The plastic housing is also designed for good range in the Casambi® network. Mains cable and luminaire cable are each held by a strain relief.
Control with Casambi®
Casambi® connects luminaires into a network via Bluetooth, without touching the existing wiring. You dim via the app (iOS and Android), save scenes and schedules and add push-buttons, sensors and remote controls – no gateway, no hub needed. Every Casambi® device also acts as a repeater in the network.
Phone not always to hand? Connected push-buttons and remote controls control the light just as well.
Technical data
| Control | Push-button on the housing and Casambi® Bluetooth: app, push-buttons, sensors, remote controls – no gateway, no hub |
| Mains voltage | 220–240 V AC, 50/60 Hz |
| Output | 24 V constant voltage, for constant-voltage LED |
| Power | max. 60 W |
| Minimum load | 6 W |
| Dimming range | 1–100 % |
| Strain relief | on the mains and luminaire side |
| Cooling | Convection, air flow |
| Service life | up to 50,000 hours |
| Dimensions | 285 × 45 × 53 mm (L × W × H) |
| Closure | screwed from the bottom |
| Material | Plastic; colour selectable on the product |
| Protection rating | IP20, for dry indoor spaces only |
Scope of delivery
Housing with built-in 24 V transformer and Casambi® module. Not included: luminaire.
Note: Please have the installation carried out by a qualified electrician. This keeps the 230 V connection safe and your luminaire working reliably.