Dimming at the push of a button. The push-button dimmer dims Tunable White LED strips (warm and cool light separately) via the push-button on the circuit board – right on the profile or luminaire, without a wall switch.
The circuit board measures only 35 × 10 × 11 mm (L × W × H) and fits into profiles, furniture and luminaires with no room for a switch.
Two channels control the warm and cool light of the Tunable White strip separately, so you set the light colour as well as the brightness.
Application
For constant-voltage LED strips and LED modules from 8 to 27 V DC, for example 12 V and 24 V strips. Power comes from a suitable constant-voltage source, which is not included. The dimmer works on its own, without an app and without a radio network.
Technical data
| Operation | Push-button on the circuit board |
| Channels | 2 (Tunable White) |
| Output current | max. 3 A per channel |
| Power | max. 81 W per channel at 27 V (at 12 V max. 36 W, at 24 V max. 72 W) |
| Input voltage | 8–27 V DC, constant voltage |
| No-load power | 0.4 W |
| Dimensions | 35 × 10 × 11 mm (L × W × H) |
| Connection | Solder pads |
| Housing | none, for built-in use |
| Operating temperature | 0–40 °C |
| Protection rating | IP20, for dry indoor spaces only |
Scope of delivery
1 push-button dimmer as circuit board, without housing, cable or power supply.
Note: Please have the installation carried out by a qualified electrician. This keeps the connection safe and your lighting working reliably.