Casambi® dimmer for your Zumtobel® 3-phase lighting track. MOUNTME® Twentyfour Track ZumTobel® 3PH sits on the ceiling at the end of the track and dims the spotlights in the track. The Casambi® module is built in and included in the delivery.
Connection to the track
Each bay (34 mm wide, 33 mm high, full housing height) on both narrow sides fits the feed-in of the track manufacturer for Zumtobel® 3-phase tracks exactly. The cable enters from the narrow side of the feed-in, just as with surface mounting. MOUNTME® supplies no part of its own for this; feed-in and track come from the track manufacturer.
Channels
One channel with up to 100 W. The DimCase is supplied unwired. Which phase of the track a channel dims – one, several or all together – is decided by the electrician when wiring. The dimmed output can also be split and fed into both bays.
For existing and new installations
MOUNTME® is built for sustainability: the DimCase fits existing track systems just as well as new projects. Usually you only need to buy the track manufacturer's end feed. You keep using the tracks, spotlights and all other components of the existing installation, add to them and so make the system controllable and ready for new requirements.
Mounting on the ceiling improves the radio connection of the Casambi® module and heat dissipation under load.
Control with Casambi®
Casambi® connects luminaires into a network via Bluetooth, without touching the existing wiring. You dim via the app (iOS and Android), save scenes and schedules and add push-buttons, sensors and remote controls – no gateway, no hub needed. Every Casambi® device also acts as a repeater in the network.
Phone not always to hand? Connected push-buttons and remote controls control the light just as well.
What can be dimmed
The built-in dimmer uses trailing-edge phase control with up to 100 W per channel at 230 V (minimum load 1 W per channel).
- Incandescent lamps and mains-voltage halogen lamps
- dimmable LED and energy-saving lamps
- LED drivers and mains-voltage LED modules dimmable with trailing-edge control
- Low-voltage halogen with electronic transformer
Do not connect: wound (conventional) transformers, motors and other inductive loads, or non-dimmable lamps. Do not mix different load types on one channel. Dimming quality depends on the electronics of the luminaire or driver.
Technical data
| Control | Casambi® Bluetooth: app, push-buttons, sensors, remote controls – no gateway, no hub |
| Dimming method | Trailing-edge phase control |
| Channels | 1 × max. 100 W at 230 V |
| Minimum load | 1 W per channel |
| Mains voltage | 220–240 V AC, 50/60 Hz |
| Standby | < 0.3 W per channel |
| Protection | Overcurrent and overtemperature protection |
| Radio | 2,402–2,480 MHz, max. +4 dBm |
| Range | indoors up to 30 m, open field up to 50 m |
| Ambient temperature | up to 45 °C |
| Protection rating | IP20, for dry indoor spaces only |
| Bays | 2 × 34 × 33 mm (W × H), on both narrow sides |
| Compatible track | Zumtobel® 3PH, connection via the track manufacturer's feed-in |
| Housing | 180 × 60 × 33 mm (L × W × H) |
| Material | Plastic, finely textured; colour selectable on the product |
| Housing closure | Lid with magnetic closure |
| Mounting | Surface-mounted on the ceiling |
Scope of delivery
DimCase with built-in Casambi® module, unwired. Not included: lighting track, feed-in and spotlights – these come from the track manufacturer or are already part of your installation.
Note: Please have the installation carried out by a qualified electrician. This keeps the 230 V connection safe and your luminaire working reliably.